SHIRO moto kacige

shiro ban

MOTO MONDO d.o.o.

Hanuševa bb
10000 Zagreb
Croatia

tel : 01/3012 700
tel : 01/3012 800
fax: 01/3012 900

prodaja@moto-mondo.hr

servis@moto-mondo.hr 

RADNO VRIJEME:

Pon-Pet: 09:00 - 17:00
Subota: 09:00 - 13:00
+385 1 3012 700 | +385 1 3012 800
+385 1 3012 900 

RSV4 Factory E5

1099 cm³
217 KS pri 13.000 o/min
125 Nm pri 10.500 o/min

197.740 kn
MPC: 26244.05 €
Opis

RSV4 FACTORY - TECHNICAL SPECIFICATIONS

ENGINE TYPE   Aprilia 4 longitudinal 65° V4 cylinder, 4-strokes, liquid cooling system, double overhead camshaft (DOHC), four valves per cylinder

BORE AND STROKE   81 x 53.32 mm

TOTAL ENGINE CAPACITY

1.099 cc

COMPRESSION RATIO   13.6:1

MAXIMUM POWER AT CRANKSHAFT MAXIMUM TORQUE AT CRANKSHAFT

217 HP (159.5 kW) at 13,000 rpm

125 Nm at 10,500 rpm

POWER SUPPLY   Airbox with front dynamic air intakes. 4 Marelli 48-mm throttle bodies with 8 injectors and Ride-By-Wire engine management.

TRANSMISSION   6-speed cassette type gearbox

Gear lever with Aprilia Quick Shift electronic system (AQS)

CLUTCH   Multi plate wet clutch with mechanical slipper system

PRIMARY DRIVE   Straight cut gears and integrated flexible coupling, drive ratio: 73/44 (1,659)

SECONDARY DRIVE   Chain: Drive ratio: 41/16 (2,562)

CONTROLS MANAGEMENT

APRC system (Aprilia Performance Ride Control) that includes engine maps (AEM), engine brake control (AEB), traction control (ATC), wheelie control (AWC), launch control (ALC), cruise control (ACC), speed limiter (APT). 6 riding modes (3 Road, 3 Track)

CHASSIS   Aluminium dual beam chassis with pressed and cast sheet elements

Available adjustments: headstock position and angle, engine height, swingarm pin height

Smart EC 2.0 electronically managed Öhlins steering damper

FRONT SUSPENSION   Smart EC 2.0 electronically managed Öhlins NIX fork.  43 mm stanchions, with TIN surface treatment Aluminium radial calliper mounts, adjustable in hydraulic compression and rebound damping and spring pre-load, 125 mm travel

REAR SUSPENSION   Upside-down double braced aluminium swingarm;

Öhlins TTX monoshock with Smart EC 2.0 electronically managed piggy- back, fully adjustable in: spring pre-load, wheelbase and hydraulic compression and rebound damping. 115 mm travel

BRAKES   Front: Dual 330-mm diameter floating stainless steel disc with lightweight stainless steel rotor and aluminium flange with 6 pins. Brembo Stylema® monobloc radial callipers with 4   30 mm opposing pistons. Sintered pads. Radial pump and metal braided brake hose

Rear: 220 mm diameter disc; Brembo calliper with two  32 mm separate pistons. Sintered pads. Pump with integrated tank and metal braided hose

Bosch ABS with cornering function and 3 map settings, equipped with RLM

(Rear wheel Lift-up Mitigation) strategy

WHEELS   Forged aluminium alloy wheels, completely machined, with 5 split spoke design.

Front: 3.5”x17” Rear: 6”x17”

TYRES   Radial tubeless.

front: 120/70 ZR 17

rear: 200/55 ZR 17 (alternative: 190/50 ZR 17; 190/55 ZR 17)

DIMENSIONS   Wheelbase: 1435.8 mm

Length: 2055 mm

Width: 735 mm

Saddle height: 845 mm

Headstock angle: 24.6°

 

 

Trail: 104.5 mm

KERB WEIGHT

202 kg (90% fuel)

EMISSIONS COMPLIANCE

Euro 5

CONSUMPTION

6.90 litres/100 km

CO2 EMISSIONS

160 g/km

FUEL TANK CAPACITY

17.9 litres (including 4-litre reserve)

COLOUR RANGE

Lava Red, Aprilia Black